THE 10 GREAT DISTINCT TYPES OF PAINTINGS(HANDICRAFT) IN INDIA

Painting is the expression of ideas and emotions, with the creation of certain aesthetic qualities, in a two-dimensional visual language. Painting is the practice of applying paint, pigment, color or other medium to a solid surface. The medium is commonly applied to the base with a brush, but other implements, such as knives, sponges, and airbrushes, can be used. The support for paintings includes such surfaces as walls, paper, canvas, wood, glass, lacquer, pottery, leaf, copper and concrete, and the painting may incorporate multiple other materials, including sand, clay, paper, plaster, gold leaf, and even whole objects. An artist’s decision to use a particular medium, such as tempera, fresco, oil, acrylic, watercolour or other water-based paints, ink, gouache, encaustic, or casein, as well as the choice of a particular form, such as mural, easel, panel, miniature, manuscript illumination, scroll, screen or fan, panorama, or any of a variety of modern forms, is based on the sensuous qualities and the expressive possibilities and limitations of those options. In art, the term painting describes both the act and the result of the action. Indian painting has a very long tradition and history in Indian art, though because of the climatic conditions very few early examples survive.[1] The earliest Indian paintings were the rock paintings of prehistoric times, such as the petroglyphs found in places like Bhimbetka rock shelters. Miniature paintings and folk art paintings are an artisan’s expression in pictorial form and have long formed an integral part of India’s handicrafts products. India has a very rich culture and tradition and it portrays it through its amazing art and craft. Various painting styles are prevalent across various regions, each representing tradition, customs, and ideologies passed on from one generation to other generation. Here is the list of 10 distinct types of Indian paintings.

1.Madhubani Paintings

One of the most celebrated styles of folk paintings in India is, Madhubani art or Mithila art which originated in the Mithila region of Bihar as a form of wall art. This painting is done with a variety of tools, including fingers, twigs, brushes, nib-pens, and matchsticks and using natural dyes and pigments. There is ritual content for particular occasions, such as birth or marriage, and festivals, such as Holi, Surya Shasti, Kali Puja, Upanayana, and Durga Puja. Natural objects like the sun, the moon, and religious plants like tulsi are also widely painted. It originated from Madhubani district of the Mithila region of Bihar. Madhubani is also a major export center of these paintings. The paintings were traditionally done on freshly plastered mud walls and floors of huts, but now they are also done on cloth, handmade paper and canvas. Madhubani paintings mostly depict people and their association with nature and scenes and deities from the ancient epics. The colors used in Madhubani paintings are usually derived from plants and other natural sources. These colors are often bright and pigments like lampblack and ochre are used to create black and brown respectively. Some of the initial references to the Madhubani painting can be found in the Hindu epic Ramayana when King Janaka, Sita’s father, asks his painters to create Madhubani paintings for his daughter’s wedding. Madhubani paintings were initially practiced by different sects of people and hence the paintings were categorized into five different styles, such as Tantrik, Kohbar, Bharni, Godna, Katchni. But today, these five different styles have been merged by contemporary artists. The designs are characterised by eye-catching geometrical patterns, symbolic images, and scenes from mythology.

2.Warli Paintings

The 3000-year-old tradition of Warli paintings of the Thane and Nasik areas of Maharashtra are closely linked with nature and social rituals of the tribe. Warli paintings showcase daily activities of the local people of that community like farming, dancing, hunting, praying etc. Traditionally, women used twigs to draw lively designs with rice paste on mud walls of tribal houses to mark celebrations of harvests or weddings. Simple geometrical patterns in white against a red or yellow surface are used to depict everyday life scenes. Warli is not just an art form, but a way of life for the Warli (Varli) tribes from the mountains and coastal regions in and around the borders of Maharashtra and Gujarat. This art has an enigmatic appeal. Those from the states of Gujarat and Maharashtra surely have a sense of sentiment attached to the art form as they’ve seen it on the walls of rural schools and homes way before they became popular on modern lifestyle products. Today, the Warli art form is not only popular in metros like Bangalore, Chennai and Delhi, but internationally as well. Today, a variety of colours are being used to replicate these artistic motifs on fabrics, home décor or other artistic forms. From brightly coloured umbrellas to coffee mugs and tea cups, rustic wall clocks, accents for walls and stationery Warli is pretty much everywhere. It uses rudimentary style where circles, triangles and squares are used to depict human forms, animals and nature. Warli women used to paint these simple images on their home walls and this art has now travelled to our drawing room.

3.Kalighat Painting or Bengal Pat

The Kalighat painting style was developed around mid 19th century in the neighbourhood of Kali Temple in Calcutta. These drawings on paper were done by a group known as “patuas” hence the name Kalighata Pata. They depicted scenes of everyday life and mythological deities in a simple yet captivating manner and developed into the popular kalighat style of painting. Kalighat painters predominantly use earthy Indian colors like indigo, ochre, Indian red, grey, blue and white. As India’s unofficial cultural capital, has pioneered several movements and trends in literature, theater, and the visual arts over the past several centuries. Painted mostly on mill-made paper with flowing brushwork and bold dyes, Kalighat paintings are said to have originated in the vicinity of the iconic Kalighat Kali Temple in Kolkata. The art almost always depicted Hindu gods and mythological characters, or incidents, themes, and characters from everyday life. Legend has it that Sati slew herself after Lord Shiva was insulted by her father Daksha. Following this, Shiva wandered with her body on his shoulder threatening to destroy the universe. Vishnu, the preserver of Earth, intervened and shattered Sati’s body into 51 pieces which fell at different spots across the Indian subcontinent. These sites are known as Shakti Peethas. The toe of her right foot is said to have fallen at the site of the Kalighat Temple, associating it with Goddess Kali- the ferocious form of Sati.

4.Phad Painting

Phad paintings are created on hand-woven coarse cotton cloth, which is soaked overnight to thicken the threads. It is then stiffened with starch from rice or wheat flour, stretched, dried in the sun and rubbed with a moonstone to smoothen the surface and give it a sheen. The entire process of making a Phad painting is completely natural, with the use of natural fibres, and natural paints sourced from stones, flowers, plants and herbs. The paints are handmade by the artists, and mixed with gum and water before applying to cloth. Typical colors seen in a Phad painting are yellow, orange, green, brown, red, blue and black. Phad painting or Phad is a style religious scroll painting and folk painting, practiced in Rajasthan state of India. The narratives of the folk deities of Rajasthan, mostly of Pabuji and Devnarayan are depicted on the phads. The Bhopas, the priest-singers traditionally carry the painted phads along with them and use these as the mobile temples of the folk deities. The phads of Pabuji are normally about 15 feet in length, while the phads of Devnarayan are normally about 30 feet long. Traditionally the phads are painted with vegetable colors. Phad finds its origins in Shahpura, near Bhilwara, Rajasthan. Phad is a type of scroll painting that narrates elaborate religious stories of local deities and gods. The Phad painting would be unrolled, or unfolded after sunset, and the performance in front of village members, would last into the night. This is perhaps why the paintings are called ‘Phad’, which means ‘fold’ in the local dialect.

5.Kalamkari Painting

This 3000-year-old organic art of hand and block printing was traditionally used for making narrative scrolls and panels. Kalamkari derives its name from kalam or pen and is a in Kalahasti and Machilipatnam. The stylised animal forms, floral motifs and mehrab designs predominant in Kalamkari paintings have also found a place in Kalamkari textiles. Kalamkari art primarily involves earthy colours like indigo, green, rust, black and mustard. The unique feature of the Kalamkari art is that it makes use of only natural colours or vegetable dyes. Kalamkari art was the household occupation of several rural women and craftsmen in the ancient times and continues to be passed down from one generation to the next. Andhra Pradesh is still the main hub of kalamkari printing in the country. Craftsmen engaged in kalamkari art had to later modernize some of the ancient, Hindu-mythology inspired kalamkari themes because there was an increasing demand for these prints in the international market. Kalamkari art is available in two distinct styles: Machilipatnam and Srikalahasti: 1. Kalahasti Kalamkari, 2.Machilipatnam Kalamkari . An increasing number of people all across the globe are now discouraging the use of harmful chemicals in production and manufacturing. In such a scenario, kalamkari emerges as the perfect craft because it avoids the use of artificial chemicals and still produces beautifully colored fabrics.

6.Miniature Painting

It developed into a distinct style with a combination of Islamic, Persian and Indian elements. The painting is done using natural stone colors on a paper-based “wasli”. Mineral colors, precious stones, conch shells, gold and silver are used in the miniatures. Fine brushwork, intricacy, detailing and stylization are the unique attributes of miniature painting. Across India, the miniature painting style has developed into distinct schools of miniature paintings like Kangra, Rajasthan, Malwa, Pahadi, Mughal, Deccan etc. to name a few. The Miniature painting style came to India with the Mughals in the 16th century and is identified as an important milestone in the history of Indian art. Miniature art is an intense labour of love illustrated on a range of materials like palm leaves, paper, wood, marble, ivory panels and cloth. Organic and natural minerals like stone dust, real gold and silver dust are used to create the exquisite colors. Even the paper used is special; polished with stone to render a smooth non porous surface. Miniature painting, also called limning, small, finely wrought portrait executed on vellum, prepared card, copper, or ivory. The name is derived from the minium, or red lead, used by the medieval illuminators. Defined by delicate brushwork, a mélange of colors, and graceful forms, miniature paintings are so delicate, that even today, with so much modernization, squirrel hair is used to create the brushes used in this art form. Each painting abounds with fine photographic details, capturing even the hair on a character.

7.Gond Painting

Gond art is a form of painting from folk and tribal art that is practiced by one of the largest tribes in India – Gond – who are predominantly from Madhya Pradesh, but also can be found in of Andhra Pradesh, Maharashtra, Chhatisgarh, and Odisha. These vibrant paintings created with a series of intricately arranged dots and dashes were developed by the Gondi tribe of central India. The tribals recreate mythological tales and oral histories to traditional songs, natural surroundings, important events and rituals in with great intricacy, rich detailing, and bright colors. Traditionally, colors were derived from natural resources like cow dung, plant sap, charcoal, coloured soil, mud, flowers, leaves etc. Gond artists now use commercial water-based colors to paint on paper and canvas. The Gond, who are predominantly from Madhya Pradesh, but also can be found in Andhra Pradesh, Maharashtra, Chhatisgarh, and Odisha. Gond paintings can be described as ‘on line work’. Art is created by lines in such a way to convey a sense of movement to still images. Dots and dashes are added to impart a greater sense of movement and increase the amount of detail. Another very striking facet of Gond paintings is the use of bright vivid colors such as white, red, blue and yellow. A certain sense of balance and symmetry can be observed in the pattern used, such as spiral forms along with trees, leaves, animals and human figures. Gond comes from the Dravidian expression, Kond which means ‘the green mountain’.

8.Kerala Mural

The paintings present a highly stylised version of the gods, with wide open eyes, elongated lips and exaggerated eyebrows, which can be compared to forms depicted in the classical theatre of Kerala. Also, the figures along with animals and vegetation are executed in a technically unmatched manner. The color palette consists of just five colors (Panchavarna) or red, yellow, green, black and white and the colors are derived from natural sources. Ochre-red, yellow- ochre, bluish- green, white and pure colors are predominantly used in Kerala mural painting. There are over the deities who are held in high esteem by the Oriyas and who inspire religion, life and activity of the people also carry with them a tradition of art and painting which is as old as the deities themselves. Kerala mural paintings are the frescos depicting Hindu mythology in Kerala. The murals of Thirunadhikkara Cave Temple and Tiruvanchikulam are considered the oldest relics of Kerala’s own style of murals. The masterpieces of Kerala mural art include: the Shiva Temple in Ettumanoor, the Ramayana murals of Mattancherry Palace and Vadakkumnatha kshetram. Other fine mural paintings are depicted in temples at Trikodithanam, Vaikom Temple, Pundarikapuram, Udayanapuram, Triprangode, Guruvayoor, Kumaranalloor, Aymanam, the Vadakkunathan temple in Trichur, the Thodeekkalam temple in Kannur and the Sri Padmanabhaswamy temple at Thiruvananthapuram.

9.Patachitra

Colors used in the Paintings are natural and paintings are made fully old traditional way by Chitrakaras that is Odiya Painter. Pattachitra style of painting is one of the oldest and most popular art forms of Odisha. Patachitra is the cloth scroll painting tradition from Odisha, dedicated to mythological and religious themes. Bold, strong outlines, vibrant colors like white, red yellow and black with decorative borders are some of the characteristics of patachitra painting style,that is admired across the world. Patachitras are a component of an ancient Bengali narrative art, originally serving as a visual device during the performance of a song. The paintings of Odisha can be divided into three categories from the point of view of medium, i.e. paintings on cloth or ‘Patta Chitra’, paintings on walls or ‘Bhitti Chitra’ and palm leaf engravings or “Tala Patra Chitra’ or “Pothi, Chitra’. The painting the ‘pattachitra’ resemble the old murals of Odisha especially religious centres of Puri, Konark and Bhubaneshwar region. The colors are rich and vibrant, the motifs and designs very creative, the themes portrayed being quite simple, the narrative mostly from religious texts, the epics. – The Patachitra painting art is believed to be more than a thousand years old.

10.Picchwai

A stretched hand spun cloth and handmade paper is used as base medium. Natural stones are hand crushed and mixed with natural binder to create natural colors. Imagineers use brushes made of natural hair sources with wooden handles. In all, the entire process followed in creating these illustrative art form at Imagineers Studio is completely environment friendly creating minimum carbon footprint in line with original tradition. The art of Picchwai originated as wall hangings behind the main deity in Krishna temples in Nathdwara. They narrate stories related to Lord Krishna. Gradually with commercialisation secular themes are also incorporated in the Picchwai style of painting. Gopashtami Pichwai is a painting of Krishna playing his flute with cows. They are large paintings on cotton cloth painted with natural colours. These paintings are usually hung on the wall behind the idol of Lord Krishna. They illustrate some of this his leelas. Pichchwais are large paintings on cloth which were typically hung in the shrine on the wall behind the main idol. Picchwai is a sanskrit word, Pich in sanskrit means ‘back’ and Wai means ‘hanging’. Pichwai painting style is an Indian traditional art form which originated hundreds of years ago in the backdrop of Shrinath Ji temple situated in Nathdwara town of Rajasthan. Persons from rural area of India work on a single peace of Picchwai fine arts for weeks.

Tagged : / / / / / / / / / / / / / / / / / / / / / / /

THE 10 GREAT FOOD PRESERVATION METHODS IN THE WORLD

Food is a source of energy for all of us. Unhealthy or spoiled food is the major cause of diseases in human beings, this is known as food poisoning. To prevent this, the food needs to be preserved in a variety of ways. Food preservation is one of the methods to protect food. Food preservation is the technique to prevent food spoilage, food poisoning, and microbial contamination in food.” Food preservation started long back in ancient times. Cooling, freezing, fermentation, sun-drying, etc., are few age old food preservation techniques. With the advent of technology, modern methods of food preservation were developed. Chemicals and other natural substances were used for preservation. These substances are known as preservatives. Listed below is an overview of 10 methods for preserving foods, including today’s popular methods, as well as other old-fashioned and ancient techniques.

1.Canning

Canning is an important, safe method of food preservation if practiced properly. Canning, method of preserving food from spoilage by storing it in containers that are hermetically sealed and then sterilized by heat. It can be used with most foods, including fruits, vegetables, meats, seafood, and some prepared foods. Canning provides a shelf life that typically ranges from one to five years, although under specific circumstances, it can be much longer. A freeze-dried canned product, such as canned dried lentils, could last as long as 30 years in an edible state. Canning requires the purchase of reusable canning jars and rings, one-time use sealing lids. The process was invented after prolonged research by Nicolas Appert of France in 1809, in response to a call by his government for a means of preserving food for army and navy use. The French Army began experimenting with issuing canned foods to its soldiers.

The larger armies of the period required increased and regular supplies of quality food. Appert’s method consisted of tightly sealing food inside a bottle or jar, heating it to a certain temperature, and maintaining the heat for a certain period, after which the container was kept sealed until use. The original fragile and heavy glass containers presented challenges for transportation, and glass jars were largely replaced in commercial canneries with cylindrical tin can or wrought-iron canisters. In 1810 Peter Durand of England patented the use of tin-coated iron cans instead of bottles, and by 1820 he was supplying canned food to the Royal Navy in large quantities. Can consists of a sheet of tin-plated iron that was rolled into a cylinder, onto which the top and bottom were manually soldered. The modern tin can is made of 98.5 percent sheet steel with a thin coating of tin.

2.Freezing

Freezing is a common method of food preservation that slows both food decay and the growth of micro-organisms. Freezing is the process of chilling foods to at least 0°F. It can be used with all foods, including fruits, vegetables, meats, seafood, grains, nuts, dairy, eggs, and prepared foods. True freezing is not possible in the freezer compartment of your refrigerator where the temperature is typically much warmer, between 10°F to 32°F. Freezing is easy to do, if you can afford to buy and operate the relatively expensive appliance. Freezing can damage some foods because the formation of ice crystals causes breakage of the cell membranes. This has no adverse effects in terms of safety, however the food loses its crispness or firmness. Freezing is the old, easiest, most convenient, and least time-consuming method of preserving foods. Most foods freeze well with the exception of produce with a high water content, cream-based items, and cooked starchy foods such as cooked noodles and rice. Freezing occurs when heat is lost from an object, which causes the molecules to slow down and form tighter bonds. Freezing is the opposite of melting, and two steps away from evaporation.

Freezing occurs at below 0 degrees Celsius with water, while some other liquids become a solid at higher or lower temperatures. Most liquids can freeze. It is a necessary step in casting. Freezing means the solidification phase change of a liquid or the liquid content of a substance, usually due to cooling. For most substances, the melting and freezing points are the same temperature; however, certain substances possess differing solid–liquid transition temperatures. Most liquids freeze by crystallization, formation of crystalline solid from the uniform liquid. Many living organisms are able to tolerate prolonged periods of time at temperatures below the freezing point of water. Besides the effect of lower temperatures on reaction rates, freezing makes water less available for bacteria growth. freezing is one of the oldest and most widely used method of food preservation. The method has been used for centuries in cold regions, and a patent was issued in Britain as early as 1842 for freezing food by immersion in an ice and salt brine. The temperature of the water remains at 32°F as the ice crystals grow, and then a rapid temperature drop occurs as the ice crystals cool. Rapid freezing improves the quality of the food. The faster food freezes, the smaller the crystals that form. Small crystals do less damage to cell walls.

3.Drying

Drying is one of the world’s oldest methods of food preservation, with the principles of this process influencing some of the most modern methods of food science. Some of the ancient dehydration methods are still the best ones. All you need is direct sunlight for a number of days and a low humidity atmosphere of below 20%. So, your geography matters, which is why sun-dried foods are such a central part of certain cultures. Drying is the process of dehydrating foods until there is not enough moisture to support microbial activity. It can be used with most foods, including fruits, vegetables, meats, seafood, grains, legumes, and nuts. Food dehydrating is based on one core principle: Quickly remove as much moisture from the food as possible to inhibit the growth of bacteria, mold and yeast. Some people prefer to dry food because it takes less time, money and energy than other food-storage methods, such as canning or freezing. Food dehydration saves money because you can buy or grow seasonal produce to dry and store for year-round use. The first automated drying process was created in 1795 by French inventors Masson and Chollet. The machine fed sliced fruit and vegetables into a hot-air dehydration chamber, with a controlled temperature of 40°C dehydrating produce ready to be pressed and sealed in tin foil. In some cases, the nutritional value and vitamins can be retained through blanching food before drying them, a process that often used when drying vegetables.

There are several different techniques, some are relatively easy to do and require no special equipment. Other methods are Spray Drying food, Freeze Drying Food. The dairy industry is one of the largest processors of dehydrated food. Many dairy products are spray dried, meaning they are automised into a fine mist then brought into contact with hot air. The moisture is instantly removed, leaving only the milk powder as a product. This method is used to make powders such as milk, whey and yeast, as well as some ice creams, cheese and fruit juices. Although spray drying food gives you the product quickly, it is a very expensive technique that requires a lot of energy. As the food is frozen, the moisture in it is turned into ice. It is then put into a vacuum at -45°C and the ice is removed by sublimation, meaning it goes directly from a solid to a gas, without ever entering liquid form. The advantage is that the food will maintain its structure and flavour, and almost any food can be freeze dried. This method is also be expensive. Many foods lose vitamins and other useful nutrients in the process.

4.Fermenting

During fermentation, lactic acid bacteria consume the sugars or carbohydrates in the food, producing acid and flavor compounds. When fermenting foods at home, we rely on creating the environment needed for a safe and effective ferment. Fermenting is the process of encouraging the growth of “good bugs” to inhibit the “bad bugs” that can spoil food. It can be used with many types of foods, including fruits, vegetables, meats, seafood, grains, legumes, dairy, and eggs to produce a wide range of products such as wine (from grapes), sauerkraut (cabbage), cured sausage (meat), and yogurt (milk). Cauliflower, carrots, cucumbers, and daikon radishes…just about any vegetable can be fermented. Cheese, yogurt, sauerkraut, kimchee, olives, salami, jerky, and bread; also, beverages such as hard cider, wine, beer, and coffee were all produced by the fermentation process. To allow for the growth of the desirable lactic acid bacteria, the process needs sufficient water, nutrients, an appropriate amount of salt, and the absence of oxygen/air.

The beginner should use tested recipes that are science based, provide the appropriate salt concentration and amounts of vegetable and, if needed, added water. Many fermented products can be produced without any special equipment. The method for each type of product is relatively easy, but requires attention to detail. Food fermentation serves five main purposes: to enrich the diet through development of a diversity of flavors, aromas, and textures in food substrates; to preserve substantial amounts of food through lactic acid, alcohol, acetic acid, and alkaline fermentations; to enrich food substrates with protein, essential amino acids, and vitamins; to eliminate antinutrients; and to reduce cooking time and the associated use of fuel. The French chemist Louis Pasteur founded zymology, when in 1856 he connected yeast to fermentation. When studying the fermentation of sugar to alcohol by yeast, Pasteur concluded that the fermentation was catalyzed by a vital force, called “ferments”, within the yeast cells.

5.Pickling

Pickling is the process of preserving or extending the shelf life of food by either anaerobic fermentation in brine or immersion in vinegar. It is the process of soaking food in a solution containing salt, acid, or alcohol. The pickling procedure typically affects the food’s texture and flavor. The resulting food is called a pickle, or, to prevent ambiguity, prefaced with pickled. Foods that are pickled include vegetables, fruits, meats, fish, dairy and eggs. Like most vegetables, pickles are almost all water and have very little fat or protein. A distinguishing characteristic is a pH of 4.6 or lower, which is sufficient to kill most bacteria. Pickling was used as a way to preserve food for out-of-season use and for long journeys, especially by sea. Pickling may also improve the nutritional value of food by introducing B vitamins produced by bacteria and it helps digestion.

South Asia has a large variety of pickles. Most methods require no special equipment. However, pickled foods can be unsafe if prepared carelessly or stored at room temperature. Pickling is often combined with another method, such as Fermenting, Canning, or just Refrigerating. Fermented pickles are full of good bacteria called probiotics, which are important for gut health. Carotene is a powerful compound that’s been shown to help lower your chances of dying of heart disease, stroke, cancer, respiratory diseases, and other conditions. November 14th is National Pickle Day. In chemical pickling, the fruits or vegetables to be pickled are placed in a sterilized jar along with brine, vinegar, or both, as well as spices, and are then allowed to mature until the desired taste is obtained.

6.Dry Salting

Dry salting is a fermentation method that involves sprinkling salt onto a dry vegetable to draw out the water. The vegetable is then pounded to further break down the cell walls and release juice in order to create enough liquid brine to submerge the vegetables. Place prepared seafood in a single layer in a container. Sprinkle generously with salt. Turnover and salt the other side. Another layer can be placed on top and the salting process repeated. Use about a quarter of the seafood weight in salt. Cover, and leave in a cool place (20°C or less) for the required time. In hot weather it is preferable to store in the chiller. Rinse under cold running water. Dry with disposable paper towels. After Salting, it will be ready to serve. It is one of the oldest methods of preserving food, and two historically significant salt-cured foods are salted fish (usually dried and salted cod or salted herring) and salt-cured meat (such as bacon).

Vegetables such as runner beans and cabbage are also often preserved in this manner. Salting is used because most bacteria, fungi and other potentially pathogenic organisms cannot survive in a highly salty environment, due to the hypertonic nature of salt. Dry salting is used for meat, fish, and vegetables. A low salt concentration, promotes fermentation, while a high salt concentration, prevents microbial growth and preserves the food in a more or less fresh, although salty state. Many people familiar with the technique consider salted vegetables such as green beans to be far superior in taste and texture than canned or frozen beans. This old-fashioned method was promoted in the early twentieth century as an alternative to canning, in order to conserve glass, tin, and fuel in time of war.

7.Curing

Curing is any of various food preservation and flavoring processes of foods such as meat, fish and vegetables, by the addition of salt, with the aim of drawing moisture out of the food by the process of osmosis. Curing is similar to pickling, and uses salt, acid, and/or nitrites. The nitrate and nitrite compounds themselves are not harmful, however, and are among the antioxidants found in fresh vegetables. Curing is used for meat and fish. Simple, modern curing methods often reduce the amount of salt and nitrites, which may require that you refrigerate or freeze the final product. Shelf-stable products require the use of adequate amounts of nitrites and a complex drying process using special equipment and exacting technique. Some curing methods also employ a secondary process such as fermenting, smoking, or sealing. Meat preservation in general comprises the set of all treatment processes for preserving the properties, taste, texture, and color of raw, partially cooked, or cooked meats while keeping them edible and safe to consume.

While meat-preservation processes like curing were mainly developed in order to prevent disease and to increase food security, the advent of modern preservation methods mean that in most developed countries today curing is instead mainly practised for its cultural value. For lesser-developed countries, curing remains a key process in the production, transport and availability of meat. Curing with salt and sugar may be called salting, salt-curing, sugar-curing or honey-curing. The application of pellets of salt, called corns, is often called corning. Curing in a water solution or brine is called wet-curing or pickling or brining. Paul Bertolli notes that a pickle contains nitrite in addition to salt. The curing of fish is sometimes called kippering. Salt inhibits the growth of spoilage-causing microorganisms by drawing water out of microbial cells through osmosis. Concentrations of salt up to 20% are required to kill most species of unwanted bacteria. Salted meat and fish are commonly eaten as a staple of the diet in North Africa, Southern China and in the Arctic where they are associated with nasopharyngeal cancer caused by infection by the Epstein-Barr Virus.

8.Smoking

Smoking is the process of flavoring, cooking, or preserving food by exposing it to the smoke from burning plant materials like wood and that too hardwood. Drying and Smoking is one of the oldest methods of preserving foodstuffs. Removing the moisture from food helps prevent bacterial and fungal growth which would ruin stored foods. Smoking, in food processing, the exposure of cured meat and fish products to smoke for the purposes of preserving them and increasing their palatability by adding flavour and imparting a rich brown colour. Food preservation is the process of treating foods in a way that prevents spoilage caused by micro-organisms. The drying action of the smoke tends to preserve the meat, though many of the chemicals present in wood smoke are natural preservatives as well. Meats are less likely to turn rancid or grow mold than unsmoked meats. Whether done on a commercial or a home scale, the smoking technique involves hanging the meat or placing it on racks in a chamber designed to contain the smoke. Commercial smokehouses, usually several stories high, often use steampipes to supplement the heat of a natural sawdust fire.

Hickory sawdust is the preferred fuel. Whatever the size of the smoking operation, it is imperative that a hardwood fire be used. In Europe, alder is the traditional smoking wood, but oak is more often used now, and beech to a lesser extent. In North America, hickory, mesquite, oak, pecan, alder, maple, and fruit-tree woods, such as apple, cherry, and plum, are commonly used for smoking. Smoking can be done in four ways: cold smoking, warm smoking, hot smoking, and through the employment of “liquid smoke”. The softwood of conifers such as spruce and pine contains pitch, which produces a film on the meat and imparts a bitter taste. Generally, smokehouse temperatures vary from 109 to 160 °F (43 to 71 °C), and smoking periods vary from as short as a few hours to as long as several days, depending on the type of meat and its moisture content. After smoking, the meat is chilled as rapidly as possible and cut and wrapped for the retail trade. Here we can preserve not only meat, fowl, and fish but also cheeses, nuts and seeds, hard-boiled eggs, and berries, as well as the variety meats including heart, tongue, and liver.

9.Sealing

Sealing is a process of covering food to keep out air, which delays the activity of spoilage organisms. It is used primarily as a complementary process to other methods such as drying or freezing. The goal is to keep oxygen out of food and thus ‘suffocate’ bacteria. Bacteria (good and bad) cannot grow without oxygen. Sealing food means to prohibit bacterial growth and thus preserve food. Both Fat Sealing and Vacuum Sealing methods are relatively easy. Vacuum sealing greatly extends the lifespan of many different kinds of food, from cheese to meat to soup. Sealing saves money. Preserving food for longer means less food spoilage and therefore less wastage of food.

Sealing allows you the option to buy food in bulk at a reduced cost and safely store it for future use. Instead of throwing out leftovers or forcing yourself to eat everything within a day, just vacuum seal and keep it for months. By sealing your food and removing air, the flavours, texture, and moisture of the food will be retained. Plus, you’ll also get much more taste out of your stored food as vacuum sealing will help to preserve nutritional value in food. Vacuum sealing foods protects them from freezer burn and dehydration. Vacuum sealing holds in the moisture, juices, and flavor of the food. You’ll notice the difference in taste. Vacuum sealing food adds a layer of protection from external sources.

10.Cellaring

Cellaring is the process of storing foods in a temperature, humidity, and light controlled environment. There are many different methods for cellaring food, all of which are relatively easy to do. Root cellaring is one of the easiest and most energy-efficient ways to store your fruits and vegetables by using the earth’s natural temperatures. A root cellar is an old-fashioned winter food storage preservation method. The ability of some vegetables and fruit to keep for months in favorable cellar conditions stems in part from the fact that they are not entirely inanimate even after picking. In some cases plants are transplanted from the field to the dirt floor of a cellar in autumn, and they then continue living in the cellar for months. With a renewed interest in gardening, food security, and even sustainable living, root cellars have returned.

While root vegetables aren’t expensive to buy, the quality of a homegrown potato or beet is far superior, plus grocery stores do not always carry vegetables year-round. Having a root cellar is like having a six-month supply of quality vegetables on hand. There is a certain peace of mind of having enough food security without being at the mercy of grocery stores and potential interruptions in the supply chain. Vegetables stored in the root cellar primarily consist of potatoes, turnips, and carrots. Other food supplies placed in the root cellar during winter months include beets, onions, jarred preserves and jams, salt meat, salt turbot, salt herring, winter squash, and cabbage. Water, bread, butter, milk, and cream are sometimes stored in the root cellar.

Tagged : / / / / / / / / / / / / / / / / / / /

THE 10 GREAT SMALLEST BIRD SPECIES IN THE WORLD (ranked by the Height of the Bird)

Bird is a warm-blooded egg-laying vertebrate animal distinguished by the possession of feathers, wings, a beak, and typically by being able to fly. Most Birds can fly, using powerful muscles to flap their wings. But few bird species do not have strong enough wings to fly , so these birds are flightless. Birds are a group of feathered theropod dinosaurs and constitute the only living dinosaurs. There are about ten thousand living species, more than half of which are passerine, or “perching” birds. Birds have wings whose development varies according to species. Many social species pass on knowledge across generations, which is considered a form of culture. Birds are social, communicating with visual signals, calls, and songs, and participating in such behaviours as cooperative breeding and hunting, flocking, and mobbing of predators. Songbirds, parrots, and other species are popular as pets. Recreational bird watching is an important part of the ecotourism industry. Many species of birds are economically important as food for human consumption and raw material in manufacturing, with domesticated and undomesticated birds being important sources of eggs, meat, and feathers. Here are the 10 Smallest Bird Species the world ranked by Height of the Bird.

1.Bee Humming Bird(Mellisuga helenae)

The Bee Humming Bird is the smallest living bird and also the world’s lightest bird at under 2 grams. It has the smallest nest in the world. The Bee Humming Bird, zunzuncito or Helena Humming Bird is a species of Humming Bird. They are also known as “the flying jewels” because they are able to change the color of their feathers when they fly, this is the unique character. It is native to Cuba. The Average length of Bee Hummingbird is 5 – 6 centimeters and weight is 1.7 grams. The male has a green pileum and bright red throat, iridescent gorget with elongated lateral plumes, bluish upper parts, and the rest of the under parts mostly grayish white. Female bee hummingbirds are bluish green with a pale gray underside. The tips of their tail feathers have white spots. Hummingbirds are named after the humming sound which is produced by their wings during flight. Hummingbirds are very intelligent animals. They have larger brain size than other birds. Their brain weights 4.2% of the hummingbird total body weight. They do not have the sense of smell.

Hummingbirds can see and hear better than humans. They can even detect ultraviolet light. They can move their wings 70 times in a single second, so it requires a lot of energy. Hummingbirds use carbohydrates (sugars) as the main source of energy for flight. Nectar from flowers is the best source of sugar. It also eats insects, which provide them with enough proteins. Female usually lays 2 eggs, which are very small about just ½ inches long. Eggs represent 10 percent of the mother’s weight. Baby cannot fly and it spends first three weeks of life in the nest. Most hummingbirds die in the first year of their life. Those that survive, have an average lifespan of 5 years in the wild and more than 10 years in captivity.

2.Costa’s Humming Bird(Calypte Costae)

The Costa’s Hummingbirds (Calypte costae) are small North American desert birds that occur in the western United States and Mexico, but are known to wander eastward and as far north as Alaska and Canada. Average length of Costa’s Humming Bird is only 8 centimeters long and average weight is 3 grams. It’s native to the southwestern USA. The desert might seem like a bad place for a creature that feeds at flowers, but it is the favored habitat for Costa’s Hummingbird. The Costa’s hummingbird can usually be found in the arid deserts and gardens of its range. The male Costa’s hummingbird has a green and black back and flanks and a small black tail with patches of white below its tail. The male Costa’s hummingbird sports a vibrant purple cap and has throat feathers that flare out behind its head. The female Costa’s hummingbird, not as distinct as the male, is gray-green above and white on its underparts.

Jules Bourcier, a French naturalist and hummingbird expert named the Costa’s Hummingbird after his friend Louis Marie Pantaleon Costa de Beauregar. Costa was a Sardinian patriot, statesman, military commander, historian, and amateur archaeologist who was also fond of collecting hummingbirds. Compact and short-tailed with a slightly drooping bill. Researchers calculated that a Costa’s Hummingbird needs to visit 1,840 flowers to meet its energy requirements for one day. Even though they are traditionally migratory birds, an increasing number of them choose to remain throughout the year in areas with temperate climates, where food supplies are ample. It feeds on nectar and insects. They are typically found near plants such as the Joshua tree (Yucca brevifolia) and cholla cactus (Opuntia acanthocarpa). They use their long, extendible, straw-like tongues to retrieve the nectar while hovering with their tails cocked upward as they are licking at the nectar up to 13 times per second. Sometimes they may be seen hanging on the flower while feeding.

3.WeeBill(Smicrornis Brevirostris)

Average length of WeeBill is just 8 centimeters and weight is 6 grams. Wingspan is approximately 15 cm (5.9 in). The Weebill was described by John Gould in 1838 as Psilopus brevirostris. The Weebill’s common name comes from the short, stubby, pale beak. The eye is pale cream, and there is a pale line above the eye. The Weebill is native to Australia’s jungles, forests and it is Australia’s smallest bird. Inhabits dry, open woodlands, especially Eucalypt forests. Eucalyptus-rich areas, they have a diet that’s based on larvae and small insects. It is very vocal as it forages in trees, where it feeds primarily on insects, sometimes in mixed flocks with thorn bills and pardalotes.

The Weebill (Smicrornis brevirostris) is a species of bird in the family Acanthizidae, it is an insectivorous passerine. The Weebill’s plumage is nondescript, with olive-grey upperparts and paler, more yellowish under parts. It grades from more brownish plumage in the Southern regions of Australia to more yellow in tropical areas. Other names of it include tree-tit, short billed tree-tit, scrub-tit, or short-billed scrub-tit. The voice of the Weebill is a loud, clear, musical “pee-pee p’wee”, “wee bit” or “wee willy weetee”, often heard from a considerable distance. They display a preference for foraging in the canopy foliage of healthy Eucalyptus trees, where they are more likely to retrieve insects. The Weebill is widespread in all climates.

4.Goldcrest(Regulus Regulus)

Goldcrest is the smallest bird in Europe. Average length of Goldcrest(Regulus Regulus) is 9 centimeters, weight is 5.7 grams and wingspan is 14 cm. Goldcrest includes many countries in the Middle East, East and Central Asia, India and many parts of Europe. It is a very small passerine bird in the kinglet family. Birds on the Canary Islands are now separated into two subspecies of the goldcrest, but were formerly considered to be a subspecies of the firecrest or a separate species, Regulus teneriffae. It is small bird with finely shaped bill and a short tail. Crown stripe yellow in female, orange in male. Since bird is often viewed from below, the crown stripe is often not visible. The dark eye with the large, pale grey eye-ring is a better character. Their thin beak is ideally suited for picking insects out from between pine needles.

It’s colourful golden crest feathers, as well as being called the “king of the birds” in European folklore, gives rise to its English and scientific names. The scientific name, R. regulus, means king or knight. The Goldcrest breeds in coniferous woodland and gardens. It builds three-layered nest on a tree branch. It is the fact that Goldcrests can incubate as many as 12 eggs at one time in their nest. Eggs are incubated by the female alone, and the chicks are fed by both parents. Contact call a very high pitched “zit zit zit”, only similar to Firecrest and treecreepers. Goldcrests eat tiny morsels like spiders, moth eggs and other small insect food. Birds from the North and East of its breeding range migrate to winter further South.

5.Simple FireCrest(Regulus Ignicapilla)

Averagelength of Simple FireCrest(Regulus Ignicapilla) is 9.3 centimeters and weight is 5.5 grams. FireCrest is a very small passerine bird in the kinglet family. The Firecrest is as small as the Goldcrest and is clearly very closely related to it, but the two species can coexist because of their subtly different ecological requirements. It is possible that this species was the original “king of the birds” in European folklore. It breeds in most of temperate Europe and northwestern Africa, and is partially migratory, with birds from central Europe wintering to the south and west of their breeding range. This kinglet is constantly on the move and frequently hovers as it searches for insects to eat, and in winter it is often found with flocks of tits.

Firecrests in the Balearic Islands and north Africa are widely recognized as a separate subspecies, but the population on Madeira, previously also treated as a subspecies, is now treated as a distinct species, the Madeira firecrest, Regulus madeirensis. The common Firecrest breeds in broadleaved or coniferous woodland and gardens. Seven to twelve eggs are incubated by the female alone. Both parents feed the chicks, which fledge 22–24 days after hatching. It may be hunted and killed by birds of prey, and can carry parasites. Simple firecrests tend to be seen more frequently during autumn and winter.

6.Pardalote(Pardalotidae)

Average length of Pardalote(Pardalotidae) is 9.5 centimeters and weight is 6 grams. The Pardalote is a particularly attractive Australian bird and native to Australia. Pardalotes are a family, Pardalotidae, of very small and brightly coloured birds. This family is composed of four species in one genus, Pardalotus, and several subspecies. Within the family two species, the forty-spotted pardalote and the red-browed pardalote, are fairly invariant species, but the remaining two species are highly variable. Spotted Pardalote also called as HeadacheBird. All four species nest in deep horizontal tunnels drilled into banks of earth. Externally about the size of a mouse-hole, they can be very deep, at a metre or more.

Some species also nest in tree hollows. Eventhough they weigh just 6 g. Their small size lets them get into small holes of eucalyptus trees to hunt for lerps and other native larvae. The name derives from a Greek word meaning “spotted”. They are seasonal breeders in temperate areas of Australia, but may breed year round in warmer areas. Pardalotes spend most of their time high in the outer foliage of trees, feeding on insects, spiders, and above all lerps. Their role in controlling lerp infestations in the Eucalyptus forests of Australia may be significant. Pardalote has short tail, strong legs, and stubby blunt beak. They are monogamous breeders, and both partners share nest construction, incubation and chick-rearing duties. Voice is a very clear and repetitive double “ding”.

7.Brown Gerygone(Gerygonemouki)

Average length of Brown Gerygone(Gerygonemouki) is 10 centimeters and weight is 6 grams. It is a Small plain bird with thin bill. It’s Upperparts brown, under parts whitish, with gray face, red eye, and distinctive patch of white in under tail. Juveniles lack red eye and have yellow gape (base of bill). Inhabits rainforest, wet forest, and surrounding habitats of Eastern Australia. The Brown Gerygone is similar to both the Large-billed, G. magnirostris, and Mangrove,G. levigaster, Gerygones. The Brown Gerygone is one a group of species of small birds which were formerly known as warblers, due to their loud, melodious song. However, as they are not related to the ‘true warblers’ that occur in Europe, Africa, the Americas and Asia, their name was changed. Their new name, ‘gerygone’, which is pronounced ‘jer-ig-on-nee’, comes from Greek, meaning ‘the children of song’. It is also known as the Brown Warbler.

The tail feathers are dark and may be white-tipped. It feeds on insects. The brown Gerygone call is a soft what-is-it. In Victoria there has been a westward expansion of this species, with confirmed sightings in the Dandenong Ranges, East of Melbourne. It has been seen in the Royal Botanic Gardens, Sydney. The Brown Gerygone builds a rounded dome nest with a tapering ‘tail’ from roots, plant fibres, spider web, moss and lichens, which is suspended from a low branch or vine. Both parents feed their young ones.

8.Verdin(Ariparusflaviceps)

Average length of Verdin(Ariparusflaviceps) is 10 centimeters and weight is 7 grams. The Verdin (Auriparus flaviceps) is a species of penduline tit. Verdins are insectivorous, continuously foraging among the desert trees and scrubs. These restless birds comb the foliage of trees for insects and spiders, sometimes hanging upside down to investigate hard-to-reach places. They supplement their insect diet with fruits and even nectar, which they may sip from hummingbird feeders. Verdin rivals the American bushtit as one of the smallest passerines in North America. It is gray overall, and adults have a bright yellow head and rufous shoulder patch (the lesser coverts). Unlike the tits, it has a sharply pointed bill.

Juveniles have a light gray body without the rufous shoulder patch and yellow head. The base of the short bill is thick by the head, and draws to a sharp point at the tip. Their nests are best described as spherical masses of bulky twigs and branches that are then lined with grasses, feathers, and hair. Verdins nest in shrubs and thorny thickets with few trees. Both males and females build nests for roosting and nesting, and both incubate the eggs and tend to young. Clutch sizes vary from 3-6 eggs, which are light green with irregular dark red-brown spots, concentrated at the bottom end of the egg.

9.GoldenHeaded Cisticola(Cisticola Exiles)

Average length of GoldenHeaded Cisticola(Cisticola Exiles) is 10 centimeters and weight 8 grams. It is tiny, sandy-colored bird with short tail and dark-streaked back. Breeding adult males have orange-gold crown. Inhabits grasslands of northern and eastern Australia, where perches prominently. Very similar Zitting Cisticola always has a streaked crown and a very different “tick-tick-tick” song but otherwise almost identical. The Golden-headed cisticola (Cisticola exilis), also known as the bright-capped cisticola. It is a species of warbler in the family Cisticolidae. It is also known as the “finest tailor of all birds”. It constructs nests out of plants and spider threads.

This species has been known by several English names in addition to the golden-headed cisticola, including bright-capped cisticola, bright-headed cisticola, bright-crowned cisticola, gold-capped cisticola, yellow-headed cisticola, exile warbler and fan-tail warbler. Males slightly heavier than females. The Golden-headed cisticola is omnivorous, primarily eating invertebrates such as insects and small slugs, but also eating grass seeds. It usually inhabits a single place throughout its life, but habitat changes sometimes cause it to move to a different location. It produces a variety of sounds distinct from other birds, which, according to the Sunshine Coast Council, range from a “teewip” to a “wheezz, whit-whit”. It mates in the rainy season. Three to four eggs are laid at a time, which are incubated by the female, taking 11 days. After hatching, the female feeds the chicks and the male defends the nest, chasing away animals that come near it. Young remain in the nest for 11–13 days.

10.Lesser GoldFinch(Spinus Psaltria)

Average length of Lesser GoldFinch(Spinus Psaltria) is 10 centimeters and weight is 10 grams. The Lesser Goldfinch is known by its scientific name Spinus psaltria, is a small perching bird that’s common to the Southwestern United States. It is native to North America, the Bahamas, and the Turks and Caicos Islands. Though similar in looks to the common sparrow, these birds, unlike the sparrow, hail from the finch family. Lesser Goldfinches are beautiful songbirds whose scientific name is derived from the ancient Greek word for female harpists, psalteria. Lesser Goldfinch birds were first formally described by the American zoologist, Thomas Say. While American Goldfinches lose all the yellow color from their plumage in winter, the Lesser Goldfinch retains a yellow tone. Though, both Lesser Goldfinches and American Goldfinches have a grayish-toned bill in winter plumage.

It feeds in small groups moving through low weeds, shrubs and trees to take mainly small seeds, as well as buds, flowers, or fruits, often visits feeders. It’s a very common bird that’s found in multiple habitats at different elevations and has been observed to be a predominantly monogamous bird. It is particularly sexually dimorphic, with significant coloration differences between males and females. Nests generally were placed toward tips of long branches in the middle of ponderosa pines. Most nests were well concealed in needle clusters in trees near forest edges and openings. This petite species is not only the smallest North American SpinusFinch, it may be the smallest true Finch in the world. Males are easily recognized by their bright yellow under parts and big white patches in the tail (outer rectrices) and on the wings. Female is similar to American Goldfinch. Like other goldfinches, it has an undulating flight in which it frequently gives a call: in this case, a harsh chig chig chig.

Tagged : / / / / / / / / / / / / / / / / / / / / / / / / / / / /